Turning the Power ON and OFF - VC-C50i / VC-C50iR
The VC-C50i/VC-C50iR camera does not have a power switch. You can switch the camera on by plugging the AC adapter into a wall outlet. When power to the camera is switched on, the LED on the camera turns green. If the monitor is switched on, an image appears on the screen. You can power the camera off using the 
on the wireless controller.
Connecting the camera to a power source:
- Connect the camera to the AC adapter.
- Connect the AC adapter to the AC cable.
- Connect the AC cable to and AC outlet.
- Whenever you turn the camera on, the first use of the PC or wireless controller to control the camera initializes the camera head position. (Initialization takes several seconds.) The LED on the camera flashes green (at 1-second intervals) during initialization.
- Never touch the camera head during initialization. This could prevent successful initialization and cause faults.
- Wait at least five seconds before turning the power back on after shutting it off. Turning it on too quickly may result in a malfunction.
- Observe all the safety instrunctions and precautions in the user manual.
|
LED Displays and the Camera Status
|
LED Display
|
Camera Status
|
|
Green
|
Camera is on. |
|
Blinking green
|
At 0.1-sec. intervals |
Wireless controller button being used. |
| At 0.5-sec. intervals |
Storing or restoring a preset, or displaying a setting menu. |
| At 1-sec. intervals |
Camera head position initialization in progress. |
|
Orange
|
Individual camera operation in progress and this camera is not selected. |
|
Blinking orange
|
At 0.1-sec. intervals |
Camera is not selected for individual operation and is being controlled from the wireless controller. |
| At 0.5-sec. intervals |
The camera is being selected or deselected for individual operation. |
|
Red
|
Camera has been turned off using the wireless controller, but it is plugged in. |
|
Off
|
Power is off. (Power is not connected to the camera.) |
