1.  Turn the camera on, and set the mode switch to .

• The last recorded image appears (single image replay) on the LCD screen.

2. Move between images using the or button.

• Use the button to move to the previous image and the button to move to the next.

• Holding the or button advances the images more rapidly, but shows them less clearly.

• Press the <DISP.> button to show the data for the displayed image.
• Press the button to delete the displayed image.

1.  Turn the camera on, and set the mode switch to .

• The last recorded image appears (single image replay) on the LCD screen.

2. Move between images using the or button.

• Use the button to move to the previous image and the button to move to the next.

• Holding the or button advances the images more rapidly, but shows them less clearly.

3.  Press the zoom lever toward .

• will display, and a magnified portion of the image will display.
• Images can be magnified up to a factor of approximately 10x.

4.  Use the , , or button to move around the image.

• If you press the <FUNC./SET> button while in magnified display, the camera switches to image advance mode and will display. You can use the or button to advance to the next or previous image at the same level of magnification. The image advance mode is cancelled when you press the <FUNC./SET> button again.

You can change the magnification level with the zoom lever.

• Movie frames and index replayed images cannot be magnified.

• You can magnify an image while it is displayed on the LCD monitor in Shooting mode immediately after the image is shot.