Installing the Battery Pack/Memory Card
Install the supplied Battery Pack NB-2LH and memory card in the camera to get ready for shooting.
Inserting / Removing the Memory Card
Inserting / Removing the Memory Card
1. Insert until the memory card clicks into place. - Ensure that the memory card is correctly oriented before inserting it in the camera. It may damage the camera if inserted incorrectly. |
|
To Remove the Memory Card
Use a finger to push the memory card in until you hear a click, then release it.
|
|
- When the upper indicator blinks green, the camera is writing, reading, erasing or transmitting an image to or from the card. During this time, do not do any of the following, it could corrupt the image or audio data.
- Subject the camera body to vibration or shocks.
- Turn the camera's power off, or open the memory card slot /battery cover.
- Please note that memory cards formatted with other manufacturers' cameras or a computer, or formatted or edited with application programs, may slow down writing to the memory card or prevent the card from operating correctly in the camera.
- You are recommended to use memory cards that have been formatted in your camera. The card supplied with the camera may be used without further formatting.
|