When handling the cartridge, take care not to allow the toner on the jammed paper to come into contact with your hands or clothing. If they become dirty, wash them immediately with cold water. Washing with warm water will set the toner, and make it impossible to remove the toner stains.
Open the front cover.
Remove the cartridge from the machine.
Remove the new cartridge from its protective bag.
Save the protective bag. You may need it later when you remove the cartridge from the machine.
Rock the cartridge five or six times to distribute the toner evenly.
Place the cartridge on a flat and stable surface. Grip the sealing tap tab and snap it in the direction shown below. Make sure that the tab itself is detached from the cartridge.
While grasping the cartridge with one hand, firmly and slowly pull the sealing tape tab with the other hand to remove the sealing tape completely. Throw the tape away.
To avoid breaking the tape, do not pull out the tape at an upward or downward angle.
Hold the cartridge and position the arrow mark on the cartridge towards the inside of the machine as shown below.
Align the projections (A) and sides of the cartridge to the guides (B) in the machine and gently slide the cartridge into the machine as far as it will go.
Close the front cover.
If the LCD displays [INSTALL CARTRIDGE] and [TONER SUPPLY LOW] alternately, reset the machine by opening the front cover and then closing it.
