For higher picture quality, we recommend playing back recordings on a TV with an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal or the Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will be automatically played back in wide screen mode on the TV screen.

See your TV or VCR instruction manual for further details.

If Your TV (or VCR) Has an S-video Input Terminal

• Use the S-150 S-video Cable to connect the S-video terminals. Use the STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect the white plug to the white AUDIO terminal L (left). Connect the red plug to the red AUDIO terminal R (right). Do not connect the yellow plug.

• Set the TV/VIDEO selector on the television to VIDEO.

• If you are connecting the camcorder to a VCR, set the input selector on the VCR to LINE.

If Your TV (or VCR) Has Audio/Video Input Terminals

• Connect the camcorder using the STV-250N Stereo Video Cable. Connect the white plug to the white audio terminal L (left). Connect the red plug to the red audio terminal R (right). Connect the yellow plug to the yellow video terminal VIDEO.

• Set the TV/VIDEO selector on the television to VIDEO.

• If you are connecting the camcorder to a VCR, set the input selector on the VCR to LINE.

Note:

• If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volume turned down as long as the camcorder' s audio terminals are connected to prevent feedback.

• If your TV is already connected to a VCR, you can connect the camcorder to the VCR instead of the TV. Follow the instructions above.