Charging and Attaching the Battery Pack Optura Xi
Article ID: ART155804 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Charging and Attaching the Battery Pack Optura Xi

Solution

Charging and Attaching the Battery Pack Optura Xi

Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message "CHANGE THE BATTERY PACK" appears.

1. Turn the POWER switch to OFF.

2. Extend the viewfinder and move it upward.

3. Attach the battery pack to the camcorder.
-
Remove the terminal cover of the battery pack.
- Align the end of the battery pack with the line on the camcorder, press lightly and slide it in the direction of the arrow until it clicks.

4. Connect the power cord to the adapter.

5. Plug the power cord into a power outlet.

6. Connect the power adapter to the camcorder' s DC IN terminal.

7. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the adapter.

8. Remove the battery pack after use.
- Press the <BATT.> button to remove the battery.


  • The battery pack may be defective when the CHARGE indicator flashes rapidly.
  • The CHARGE indicator informs you about the charge status:
    0-50%: Flashes once every second
    More than 50%: Flashes twice every second
    100%: Glows steadily
  • Do not disconnect and reconnect the power cord while charging a battery pack. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.


SIMS Doc Id

0