Loading/Unloading a Cassette Optura Xi
Use only videocassettes marked with the logo.
1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover. - The cassette compartment opens automatically.
2. Load/unload the cassette. - Load the cassette with the window facing the grip belt and the REC/SAVE tab facing upward. - Unload the cassette by pulling it straight out.
|
|
3. Press the mark on the cassette compartment until it clicks.
4. Wait for the cassette compartment to retract automatically and close the cassette compartment cover.
|
|
- Do not interfere with the cassette compartment while it is opening or closing automatically, or attempt to close the cover before the cassette compartment has fully retracted.
- Be careful not to get your fingers caught in the cassette compartment cover.
|
- If the camcorder is connected to a power source, cassettes can be loaded / unloaded even if the POWER switch is set to OFF.
- flashes in red if no cassette is inserted when turning on the power (in CAMERA and PLAY (VCR) mode).
- With some types of tapes, the remaining tape display may not be accurate.
- If the camcorder is mounted on a tripod, dismount the camcorder to open the cassette compartment.
|