Loading and unloading a cassette into the XL2 camcorder

Article ID: ART156103 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Loading and unloading a cassette into the XL2 camcorder

Solution

Loading/Unloading a Cassette

Use only videocassettes marked with the logo.

  1. Slide the <EJECT> switch to open the cassette compartment cover.
    - The cassette compartment opens automatically.




  2. Load/unload the cassette.
    - Load the cassette with the window facing outward.
    - Unload the cassette by pulling it straight out.

  3. Press the mark on the cassette compartment until it clicks.




  4. Wait for the cassette compartment to retract automatically and close the cassette compartment cover.




  • If the camcorder is connected to a power source, cassettes can be loaded/unloaded even if the POWER dial is set to <OFF>.
  • Do not interfere with the cassette compartment while it is opening or closing automatically, or attempt to close the cover before the cassette compartment has fully retracted.
  • Be careful not to get your fingers caught in the cassette compartment cover.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments