Scanning a document into a Polling Box L170

Article ID: ART156197 | Date published: 06/09/2015 | Date last updated: 10/16/2015


Scanning a document into a Polling Box


Scanning a Document into the Polling Box

Follow this procedure to store a document in the polling box. The document remains in the polling box so that other fax machines can poll it. To use polling sending, you have to previously create a polling box.

  1. Load the document, face down in the ADF.

  2. Press <Fax>.
    If you are already in the Fax standby mode, you can skip this step.

  3. Adjust any necessary settings for your document.

    • Press <Image Quality> to select the fax resolution.
    • Press <Exposure> to select the scan density.

  4. Open One-Touch Speed Dial panel, then press <Polling>.

  5. Press <Set>.
    The document is scanned into the polling box.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments