How to operate the wipe and overlap digital effects on the GL2.
Article ID: ART156485 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

How to operate the wipe and overlap digital effects on the GL2.

Solution

When operating faders in TAPE CAMERA mode, make sure the program selector is set to .

  1. Press the D.EFFECTS/BARS SELECT button.
    • The digital effects menu appears.
  2. Select FADER and press the SELECT dial in.
    • FADE-T, WIPE and OVERLAP settings appear.
  3. Select WIPE or OVERLAP and press the D.EFFECTS/BARS SELECT button.
    • The menu closes and the name of the selected fader flashes in the display.
  4. Press the D.EFFECTS/BARS ON/OFF button during recording.
    • The name of your selection stops flashing.
    • Each time you press the D.EFFECTS ON/OFF button, the chosen fader becomes activated (display lights continuously) or deactivated (display flashes).

During Recording

  1. Press the start/stop button.
    • The last scene is memorized as a still image and the camcorder goes into record pause mode.
  2. Press the start /stop button.
    • Recording starts, and the still image gradually changes to the scene you are recording.

SIMS Doc Id

0