Ask a Question

Playing back video on a television screen ZR60, ZR65mc, and ZR70mc

Article ID: ART156595 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Playing back video on a television screen ZR60, ZR65mc, and ZR70mc

Solution

Playing back video on a Television screen ZR60, ZR65mc, and ZR70mc

You can play back video on TVs with audio / video terminals.

 
  • For high picture quality, we recommend using a TV with an S (S1) terminal.
  • TVs with S1-terminal or Video ID-1 system: Recordings made in the 16:9 mode will be automatically played back in wide screen mode.
  • The AV terminal also serves as headphones terminal. When "" is displayed on the screen, change the setting following the procedure below:
    • Open the menu and select [VCR SETUP]. Select [AV/PHONES ], set it to [AV] and close the menu.

  • When you use the TV as a monitor during recording, keep the TV volume turned down as long as the camcorder's audio terminals are connected. An unpleasant high-pitched squeal, called feedback, may be produced if sound from the TV speakers is picked up by the microphone.

Connecting to the Television or VCR

Skip to TVs with Audio/Video Terminals

Skip to Playing back the tape

TVs with S (S1)-Video Input Terminal

  1. Turn off all devices before starting the connections.

  2. Connect the S-150 S-video Cable (optional) to the S-video terminals.

  3. Connect the STV-250N Stereo Video Cable to the camcorder's AV terminal and the audio terminals of the TV/VCR.
    - Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red AUDIO terminal R (right). Do not connect the yellow plug.

  4. If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.

TVs with Audio/Video Terminals

  1. Turn off all devices before starting the connections.

  2. Connect the STV-250N Stereo Video Cable to the camcorder?s AV terminal and the audio/video terminals on the TV/VCR.
    - Connect the white plug to the white audio terminal L (left), the red plug to the red audio terminal R (right) and the yellow plug to the yellow video terminal VIDEO.

  3. If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
  • We recommend powering the camcorder from a household power source.
  • TVs with S1-terminal or Video ID-1 system: Recordings made in the 16:9 widescreen mode will be automatically played back in widescreen mode.

Playing Back a Tape

After loading a cassette that has been recorded onto, you can play back the tape on the camcorder.

1. Set the POWER switch to PLAY (VCR). On the ZR65mc and ZR70mc, set the CARD/TAPE switch to TAPE.

2. Open the LCD panel.
  • You can also close the LCD panel with the screen facing outward.


3. Press the  button to rewind the tape.

  • To fast forward the tape, press the button.
  • To stop playback, press the  button.

4. Press the  button to begin playback.

5. Press the  button to stop playback.



  • If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette.
  • To use the viewfinder, close the LCD panel. The built-in speaker does not sound. Use headphones when using the viewfinder.
  • About the screen display: During playback, the time code gives the hours, minutes, seconds and frames. The remaining tape time may not appear when the time left is less than 15 seconds.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments