Receiving Faxes Manually: Manual Mode

If you want to select [Manual], check the following:

Select This Mode If:

		you only have one telephone line for fax and telephone use.
		you receive mainly voice calls and sometimes faxes.

You Will Need To:

		set [MANUAL MODE].
		make sure the [REMOTE RX] setting in the [RX SETTINGS] menu is enabled. If you want to start receiving a document from the telephone.

When You Receive a Fax Call
The telephone will ring. Pick up the handset and if you hear a beep, press <B&W Start> on the machine to receive the fax, or enter the two-digit ID code from the telephone, then hang up the handset.


If the offhook alarm starts beeping, make sure that the handset is resting properly on the handset cradle. The offhook alarm can be turned off.


When You Receive a Voice Call
The telephone will ring. Pick up the handset to answer the call. If the caller wants to send a document after talking to you, ask them to press the start key on their fax machine. When you hear a beep, press <B&W Start> on the machine to receive the fax, then hang up the handset.


The telephone rings for every call, whether it is a fax call or a voice call. If you want the machine to receive faxes automatically after ringing for a specified numbers of rings, enable the [MAN/AUTO SWITCH] setting. You can also specify the number of rings before the machine receives faxes.