Loading Documents in the ADF-IC D/PC 1000 Series

Article ID: ART157015 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Loading Documents in the ADF


Loading Documents in the ADF

  1. Make sure there is no document on the platen glass.

  2. Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a flat surface to even the stack.

  3. Adjust the slide guides to the width of the document.

  4. Load the documents face down in the ADF.

The document is now ready for scanning.
For a multipage document, the pages are fed one by one from the top of the stack (from the last page).
Wait until all pages of your document have been scanned before starting a new job.
30 sheets of LTR-size (20 lb bond (80 g/m2 )) documents can be set in the ADF. If more than 30 sheets (LTR) of documents are set in the ADF, paper jams may occur.

The Paper Path of the Automatic Document Feeder

When documents are set in the ADF, the scanning unit moves to the position shown in the figure above and it is fixed there. When a document is placed on the platen glass, the scanning unit moves to scan it.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments