Selecting the Paper Feeding Location (Cassette or Multi-purpose Tray)
When making copies on paper which cannot be loaded in the cassette, such as thick paper, transparencies, labels, envelopes, tracing paper, etc., you can use the multi-purpose tray.
|
|
The settings changed in the Additional Functions are not returned automatically to the settings you set previously. Change to the previous settings again if necessary. |
Press <Paper Select> to select the paper feeding location (cassette or multi-purpose tray).
* :If you select a paper type other than [PLAIN PAPER] in [MP PAPERTYPE].
# :If you set [HIGH COPY MODE] to [ON].
|
|
When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the copies may have marks. To prevent, wait about one minute before making copies. |
|
|
When making copies of a small size or thick paper*, etc., the copy speed may be slower than usual. *The paper type should be selected in <ADDITIONAL FUNCTIONS>. |
|
|
If you intend to make a copy and print with a thermal transfer printer on one sheet of paper, make the copy first. Failure to do so may make copies or cause a paper jam. |
|
|
When copying onto transparencies, remove each transparency from the output tray as it is output. |