Enlarging/Reducing Using Preset Copy Ratios-IC D/PC 1000 Series

Article ID: ART157021 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Enlarging/Reducing Using Preset Copy Ratios


Enlarging/Reducing Using Preset Copy Ratios

You can enlarge or reduce the copy size using preset copy ratios.

When the [MAX. SCAN LENGTH] is set to 14" (356 mm) in [COPY SETTINGS] in the <ADDITIONAL FUNCTIONS>, the shadow of the ADF roller appears on reduced copies when using the platen glass.

  1. Press <Enlarge/Reduce>.

  2. Press <> or <> to select the copy ratio.

    You can select from the following:
    - 200% MAX.
    - 129% STMTLTR
    - 100%
    - 78% LGLLTR
    - 64% LTRSTMT
    - 50% MIN.

  3. Press <Set>.

    If the [PAPER SIZE GROUP] of [COPY SETTINGS] in the <Additional Functions> is set to [A] or [AB], the preset copy ratios will be as follows:
    A: 50%, 70%, 100%, 141%, 200%
    AB: 50%, 70%, 81%, 86%, 100%, 115%, 141%, 200%
    Enlarging or reducing using preset copy ratio is not available with the 2 on 1 copy function.
    To reset the copy ratio, press <Enlarge/Reduce> several times to display [DIRECT 100%] ratio, then press <Set>.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments