Enlarging/Reducing Using Custom Copy Ratios-IC D/PC 1000 Series

Article ID: ART157022 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Enlarging/Reducing Using Custom Copy Ratios


Enlarging/Reducing Using Custom Copy Ratios

This feature is not available for the "*61" models.

  1. Press <Enlarge/Reduce> twice.

  2. Use the numeric keys to enter the copy ratio.

    You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
    Even after entering the copy ratio, you can press <> or <> to adjust the copy ratio. To increase the copy ratio, press <>. To decrease the copy ratio, press <>.

  3. Press <Set>.

    Enlarging or reducing using custom copy ratio is not available with the 2 on 1 copy function.
    To reset the copy ratio, press <Enlarge/Reduce> several times to display [DIRECT 100%] ratio, then press <Set>.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments