Specifications for the ZR200 and ZR300

Article ID: ART157056 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Specifications for the ZR200 and ZR300

Solution

Specifications for the ZR200 and ZR300

System

Memory Card (ZR90/ZR85)

Input/Output Terminals

Power/Others

System

Video Recording System 2 rotary heads, helical scanning DV system (consumer digital VCR SD system), digital component recording
Audio Recording System PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch)
Television System EIA standard (525 lines, 60 fields) NTSC color signal
Image Sensor 1/6-inch CCD, approx. 680,000 pixels
Effective pixels: tape approx. 340,000 pixels
card approx. 450,000 pixels
Tape Format Videocassettes bearing the "MiniDV" mark.
Tape Speed SP: 18.81 mm/s (0.74 ips), LP: 12.56 mm/s (0.49 ips)
Maximum Recording Time (80 min. cassette) SP: 80 min., LP: 120 min.
Fast Forward/Rewind Time Approx. 2 min. 20 sec. (with a 60 min. cassette)
LCD Screen 2.4-inch. TFT color, approx. 112,000 pixels
Viewfinder 0.33-inch. TFT color, approx. 113,000 pixels
Microphone Stereo electret condenser microphone
Lens ZR300: f=2.8-61.6 mm, f/1.6-3.6, 22x power zoom
35mm equivalent:
Tape: 4:3 recording: 53.5-1177 mm
16:9 recording : 44.2-972 mm
Card: 46.9-1032 mm
ZR200: f=2.8-56 mm, f/1.6-3.2, 20x power zoom
35mm equivalent:
Tape: 4:3 recording: 53.5-1070 mm
16:9 recording : 44.2-884 mm
Card: 46.9-938 mm
Lens Configuration 11 elements in 8 groups
Filter Diameter 28mm
AF system TTL autofocus, manual focusing possible
Minimum Focusing Distance 1 m (3.3 ft.); 1 cm (0.39 in.) on maximum wide angle
White Balance Auto white balance, pre-set white balance (indoor, outdoor) or custom white balance
Minimum Illumination 2.0 lx (using the Night mode)
Recommended Illumination More than 100 lx
Image Stabilization Electronic

Memory Card (ZR90/ZR85)

Recording media SD Memory Card, MultiMediaCard
Number of Recording Pixels Still image: 1024 x 768, 640 x 480 pixels
Movie: 320 x 240, 160 x 120 pixels, 15 frames/sec.
File Format Design rule for Camera File system (DCF), Exif 2.2* compliant, DPOF compliant (still images only)

* This camcorder supports Exif 2.2 (also called "Exif Print"). Exif Print is a standard for enhancing the communication between camcorders and printers. By connecting to an Exif Print-compliant printer, the camcorder's image data at the time of shooting is used and optimized, yielding extremely high quality prints.

Image Recording Format Still image: JPEG (compression: Super Fine, Fine, Normal) Movie: AVI (image data: Motion JPEG; audio data: WAVE (monaural))

Input/Output Terminals

AV Terminal 3.5 mm minijack
Video: 1 Vp-p/75 ohms unbalanced
Audio output: -10 dBV (47 kohm load)/3 kohms or less
Audio input: -10 dBV/40 kohms or more
DV Terminal Special 4-pin connector (IEEE 1394 compliant)
Headphone Terminal 3.5 mm stereo mini-jack
USB Terminal mini-B

Power/Others

Power supply (rated) 7.4 V DC
Power consumption (AF on) 2.3W (using viewfinder), 3.1W (using LCD screen in normal brightness)
Operating temperature 32 - 104 degrees F (0 - 40 degrees C)
Dimensions (W x H x D) 51 x 93 x 130 mm (2.0 x 3.7 x 5.1 in.) excluding protrusions
Weight (camcorder body only) 430 g (15.2 oz.)

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments