Ask a Question

Adjusting the playback volume Elura 60, 65, 70, 80, 85, and Elura 90

Article ID: ART157067 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Adjusting the playback volume Elura 60, 65, 70, 80, 85, and Elura 90

Solution

Adjusting the playback volume

When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.

When Using Headphones

The headphones terminal also serves as AV terminal. Headphones can only be used when "" is displayed on the screen. If not, change the setting following the procedure below.

Open the menu and select [VCR SETUP]. Select [AV/PHONES ], set it to [PHONES ] and close the menu.

  • The speaker does not sound when "" is displayed.
  • Do not connect headphones unless "" is displayed as it produces noise.

Adjusting the Volume

Turn the SET dial up to increase the volume, and down to lower the volume.

  • A volume bar appears for 2 seconds.
  • You can turn off the volume completely by turning the <SET> dial down until [OFF] appears. Turn the <SET> dial up to increase the volume again.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments