Setting the Date/Time

The Set Date/Time menu will appear when the camera is first turned on or the date battery has run down. Start from Step 4 to set the date and time.

1. Turn on the camera.
   
   
2. Press the <MENU> button and select the [ (Set up)] menu using or .
   
   
   
   
3. Press or to select [(Date/Time)], and then press the <SET> button.
   
   
   
   
4. Set the date and time.
   
   
   • Press or to highlight another field.
   • Press or to change the value of the highlighted field.
   • The date can be set up to the year 2030.
   
   
   
   
5. Press the <SET> button.
   
   
6. Press the <MENU> button.

The date, time and other camera settings may reset to the default settings if the batteries have been removed for more than three weeks. If this happens, reset these settings. For printing images with the date on them, refer to the Direct Printer User Guide or the Software Starter Guide.

Charging the date/time battery The camera has a built-in rechargeable lithium battery for saving settings such as the date and time. This battery is recharged by the AA-size batteries while it is in the camera. Right after purchasing the camera, leave fully charged batteries in the camera, or plug in the AC Adapter Kit ACK600 (sold separately), for about 4 hours to charge the date/time battery. It will charge even when the camera power is turned off. If the Date/Time menu appears when the camera power is turned on, the date/time battery charge is low. Use the above method to recharge it.