Two-Sided Copy

Using the multi-purpose tray, you can copy two documents on opposite sides of a single sheet.

1. Load the first page of the document face down in the ADF, then press <Start> to begin copying.
   
   
   
   
2. Load the next page of the document in the ADF.
   
   
   Portrait orientation document:

   Load the page so that the top edge is opposite to the top edge of the previous page.

   
   Landscape orientation documents:

   Load the page so that the orientation is the same as the previous page.

   
   
   
3. Turn over the copy you made in Step 1 to make sure that the inner and front side of it will remain in the same position as shown below, then insert it into the multi-purpose tray.
   

   If the copied sheet is curled, uncurl it before inserting it into the multi-purpose tray. Failure to do so will cause paper creases and paper jams.

   
   
4. Press <Paper Select> to select the multi-purpose tray.
   

   
   

5. Press <Start> to copy the next page to finish making your two-sided copy.
   
   
   
   
   
   

1. Place the first page of the document face down on the platen glass, then press <Start> to begin copying.
   
   
   
   
2. Place the next page of the document on the platen glass.
   
   
   Portrait orientation document:

   Place the page so that the top edge is opposite to the top edge of the previous page.

   
   Landscape orientation documents:

   Place the page so that the orientation is the same as the previous page.

   
   
   
3. Turn over the copy you made in Step 1 to make sure that the inner and front side of it will remain in the same position as shown below, then insert it into the multi-purpose tray.
   

   If the copied sheet is curled, uncurl it before inserting it into the multi-purpose tray. Failure to do so will cause paper creases and paper jams.

   
   
4. Press <Paper Select> to select the multi-purpose tray.
   

   
   

5. Press <Start> to copy the next page to finish making your two-sided copy.