Installing the battery PowerShot SD200, SD300, SD400, SD430, SD450, SD600 and SD630
Article ID: ART157394
|
Date published: 06/09/2015
|
Date last updated: 08/17/2015
Description
Installing the battery PowerShot SD200, SD300, SD400, SD430, SD450, SD600 and SD630.
Solution
Installing the Battery Pack
Install Battery Pack NB-4L (supplied) as shown below.
Please recharge the battery pack before you use it for the first time.
Slide the battery cover/SD card slot in the direction of the arrows.
*SD300 shown. For other models the details are slightly different.
Press the battery lock while inserting the battery pack all the way in until the lock clicks. Insert the battery pack correctly by aligning the arrows on the camera and the battery pack. To remove the battery pack, press the battery lock and pull the battery pack out. - Align the on the battery pack and battery chamber and insert it correctly.
*SD300 shown. For other models the details are slightly different.
Slide the battery cover/SD card slot closed.
Please watch the loading slot area carefully as you insert and remove the battery pack.
Do not turn off the power or open the battery cover while the camera's indicator blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card.
Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may reset to the default settings if the battery pack has been removed for more than three weeks.
Please use an AC Adapter Kit ACK-DC10 (sold separately) for extended use of the camera.
Please recharge the battery pack before you use it for the first time.
*SD300 shown. For other models the details are slightly different.
on the battery pack and battery chamber and insert it correctly.
*SD300 shown. For other models the details are slightly different.
Please use an AC Adapter Kit ACK-DC10 (sold separately) for extended use of the camera.