Set Automatic Duplex Printing (Mac OS X)

Procedures for setting automatic duplex printing are as follows.

Notes:

• Confirm that the cable is connected (if using a USB connection) and the printer is powered on before continuing.
• Make sure that the actual size of the paper is suitable for automatic duplex printing.
  The sizes of media suitable for automatic duplex printing are A4, Letter, A5, and B5.
• Due to OS limitations, multiple copies cannot be printed when 'Automatic Duplex Printing' is selected.

1. To open the Print dialog, open the file to print, and select 'Print' from the File menu.
   
   
   
   
2. In the Printer pop-up menu, select the printer you are using.
   
   
   
   * The image is an example using the iP_4000 model.
   
   
3. In the third pop-up menu from the top, select Duplex Printing & Margin.
   
   
   
   * The image is an example using the iP_4000 model.
   
   
4. Check 'Automatic Duplex Printing'.
   
   
   
   * The image is an example using the iP_4000 model.
   
   Note: The sizes of media suitable for automatic duplex printing are A4, Letter, A5, and B5.
   
   
5. Select the proper options for the following:
   
   (5-1) Print Area: In duplex printing, the printable area of the top of the paper is smaller than normal printing by 2 mm. To keep the entire print data within the printable area for printing, select 'Use reduced printing'. To print in regular size, select 'Use normal-size printing'.
   
   (5-2) Stapling side: Select one of the following for the location of the staple:
   
   
   
   
   
   
   
   (5-3) Margin for stapling: Specify the margin between 0 and 30 mm.
   
   
   
   
   * The image is an example using the iP_4000 model.
   
   
6. Click 'Print' to perform printing. Note: After printing on the first side of the paper, the printer will stop printing temporarily to allow the ink to dry. Do not touch the printed surface.
   
   
   
   * The image is an example using the iP_4000 model.
   
   
7. Settings for duplex printing are completed.