Install the printer driver after download (Windows)

Article ID: ART157987 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Install the printer driver after download (Windows)


Install the printer driver after download (Windows)

Note: Before installing the printer driver, confirm that the printer is powered OFF.

  1. Double-click the downloaded driver file.


    -Some drivers will begin to install automatically at this point. Please skip to Step 4. if installation begins automatically.

    -If a Security warning message appears click 'Run'.

  2. Click 'OK' to decompress the driver files. The driver files will decompress to a folder in the same location as the original file.

  3. Open the decompressed folder, and double-click the Setup.exe icon.

    Note: The icon display may vary depending on the version.

  4. The following screen will be displayed. If application software or anti-virus software is running, close them. When the following screen is displayed, click 'Next'.

    Note: The screen display may vary depending on the Windows version or the printer driver version.

  5. The Select Your Place of Residence window is displayed. Select the place of your residence, then click 'Next'.

  6. The Software License Agreement screen will be displayed.

    Read the above license agreement. Click 'Yes'. The installation will start. Clicking 'No' will cause installation to fail.

    Note: In Windows98/Me, if the BJ raster printer driver has been installed previously, a system restart may be required to update the USB port driver. In this case, follow the instructions, click 'OK', and the system will be restarted. Re-install the printer driver.

  7. The Printer port screen will be displayed.

  8. Examine the cable connection between the printer and the computer, then power ON the printer. The Printer port screen is displayed for a moment to detect a printer port. When the printer port is automatically detected, the screen will disappear.

    Note: If a printer port is not detected successfully, disconnect and re-connect the printer cable. When you select a preferred printer port, select 'Select printer port', then click 'Manual' selection.

  9. When the installation is completed, the following message will be displayed:

  10. Click 'Finish' to complete the setup program. This shows the installation completion. The System Settings Change window is displayed.

    Note: If the BJ raster printer driver has been installed before, the following message may be displayed.

    If so, click 'OK' to restart the system. This completes the printer driver installation.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments