Attaching the Bluetooth unit to the printer - i80

Article ID: ART158052 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Attaching the Bluetooth unit to the printer - i80


Attach the Bluetooth Unit to the Printer

Attach the Bluetooth unit to the printer in accordance with the following procedures:

  1. Power the printer off. 

    Note:  Do not attach the Bluetooth unit while the printer is powered on.  Doing so may damage the printer.

  2. Open the print head cover.

    <1> Print Head Cover

  3. Remove the Bluetooth connector cover.

    <1> Remove the cover by pressing it with your fingers. 

    Note:   Be sure to keep the Bluetooth connector cover in a safe place. The Bluetooth connector cover needs to be re-attached to prevent dust on the Bluetooth unit connector after the Bluetooth unit is removed.

  4. Insert the Bluetooth unit to the Bluetooth unit connector.

    <1> Firmly press the unit to the side until it is properly seated.

  5. Insert the lock cover to the right of the Bluetooth unit.  (i80 only)

    <1> A click sound is made when fully inserted.

  6. Close the print head cover.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments