Cleaning the scanner (LiDE 20, 25, 30, 35, 50, 60, 70, 80 and N670U, N676U, N1240U, N650U, N656U, N1220U)

Article ID: ART158063 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Cleaning the scanner (LiDE 20, 25, 30, 35, 50, 60, 70, 80 and N670U, N676U, N1240U, N650U, N656U, N1220U)

Solution

Care and Maintenance


Clean off the dirt and dust that adheres to the exterior, document glass and document cover of the scanner during the course of ordinary operation using the following procedures.

Detach the USB cable from the computer.
   
When cleaning the document cover or document glass, dampen a clean, soft cloth with water and wring the cloth well. Use the well-wrung cloth to gently remove dirt and dust. Then, thoroughly remove any moisture or water vapor with a soft, dry cloth. Be particularly careful to remove any traces of dirt or liquid when wiping the document glass.

 
*Moisture left on the document glass or cover may damage photographs and other documents as well as produce poor results.


*Do not dampen the connectors, ports or other metallic components on the scanner's back panel. Immediately remove any moisture that contacts these components by wiping them with a dry cloth.


*Do not use an excessively wet cloth or apply a liquid to any portion of the scanner. Any moisture that enters the interior, the underside of the document glass or the sensors may degrade image quality and lead to malfunctions.


*Never use substances containing alcohol, thinner or benzene on the equipment. Use of these substances may deform, discolor or dissolve the casing.


Outer Casing

Document Glass

Document Cover




 


Never use substances containing alcohol, thinner or benzene to clean the equipment.

 

*Do not press heavily on the document glass when cleaning.

 

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments