The Set Printer IP Address / Printer IP Address Setup dialog box is displayed during setup

The following dialog box is displayed if no printer was detected on the network.
Specify an IP address to detect the target printer.

(1) Get IP address automatically

Detects the printer automatically. If automatic printer detection fails, check the network settings and your network connection.

(2) Use next IP address

Select this check box to manually specify the IP address for the printer to detect.
IP Address/Subnet Mask/Default Gateway:
Enter each value to specify a fixed IP address when Use next IP Address is selected.

(3) Network Information

The Network Information dialog box is displayed to confirm network settings when your access point or your printer cannot be detected automatically during setup for use over the network. This button is enabled when an access point was not detected or could not be connected.

(4) Connect

Searches for the printer with the specified settings.

(1) TCP/IP Setting

Select Get IP address automatically or Use next IP address. Select Get IP address automatically to search for the target printer automatically. If it fails, check the network settings and the network connection.
IP Address/Subnet Mask/Router:
Enter each value to specify a fixed IP address when Use next IP address is selected.

(2) Network Information

The Network Information dialog box is displayed to confirm network settings when your access point or your printer cannot be detected automatically during setup for use over the network. This button is enabled when an access point was not detected or could not be connected.

(3) Connect

Searches for the printer with the specified settings.