Procedure for using DPOF Transfer Order PowerShot SD Series

Article ID: ART158842 | Date published: 06/09/2015 | Date last updated: 08/18/2015


Procedure for using DPOF Transfer Order PowerShot SD Series


Image Transfer Settings (DPOF Transfer Order)

Using the camera, you can make marks on images you wish to transfer and attach to e-mails. (Please use the supplied software for actually transferring images.) These settings are compatible with the Digital Print Order Format (DPOF) standards.

The mark will display on images that have had transfer marks set by another DPOF-compliant camera. These settings will be overwritten by any marks set by your camera.

Selecting Images for Transferring

1. In the [ .(Replay)] menu, select [.(Transfer Order)] and press the <FUNC./SET> button.

2. Select [Order] using the or button and press the <FUNC./SET> button.

Pressing [Reset] cancels the transfer settings for all images on the SD card.

3. Select images for transferring.

Single Images
  • Select an image using the or button and mark or remove marks from images using the or button.
  • You can use the same procedures to select images in index replay (3 images).
All the Images on a SD Card
  • Switch to index replay (three images).
  • Press the <FUCN./SET> button, select [Mark All] using the or button and press the <FUNC./SET> button again. (If you select [Clear All] instead of [Mark All], you can remove marks from all the images.)
  • You can mark or remove a mark from each image after marking or removing marks from all the images.

4. Press the <MENU> button.

The selection mode will turn off and the Transfer Order menu will reappear.

  • Images are transferred in order from oldest to newest by the shooting date.
  • A maximum of 998 images can be marked per SD card.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments