Copying Documents

If you make copies of multiple documents at a time, the number of pages the fax can scan into memory varies depending on the scanning resolutions as follows:

* STANDARD and FINE result in the same resolution when making copies
* If MEMORY FULL appears on the LCD when making copies, reduce the number of documents to be copied or reduce the amount of total copies.

1. Lift up the document tray.
   
   
   
   
2. Insert the top of the document, face up, into the ADF (1) until a beep is heard.
   
   
3. Adjust the document guide to the width of the document.
   
   
   
   
4. Press <Resolution> to select the resolution.
   You can select [STANDARD], [FINE] or [PHOTO].
   
   
5. Press <Start/Copy>.
   
   
6. Enter the number of copies (up to 99) using the numeric buttons.
   To make a correction to the number of copies, press <Clear> and re-enter the number.
   
   
7. Press <Start/Copy>.
   To stop copying anytime, press <Stop>. If the document does not eject, press <Start/Copy> for a few seconds, then the fax will feed out the document.
   
   
8. The new resolution will remain until it is changed.

See below for B95 Operation Panel

---

FAXPHONE B95 Operator Panel

Click on either One-touch or TAM buttons for detailed information.

---

One-touch Buttons

Back

TAM Buttons

Back