Ask a Question

Set RX Start Speed to a slower setting (F50)

Article ID: ART159186 | Date published: 06/09/2015 | Date last updated: 08/18/2015
 

Description

Set RX Start Speed to a slower setting (F50)

Solution

Change RX Start Speed Setting

The message [START AGAIN] will appear if phone line conditions are less than perfect. Decrease the transmission (RX or send) speed if this message appears frequently on the LCD.

  1. On the operator panel, press <Menu> repeatedly until [FAX SETTINGS] appears.

  2. Press <Set>.

  3. Press the right arrow repeatedly until [RX SETTINGS] appears.

  4. Press <Set>.

  5. Press the right arrow repeatedly until [RX START SPEED] appears.

  6. Press <Set>.

    1. The factory default RX (send) Speed is 33600 bps.
    2. You can select from the following RX Speeds:
      14400 bps
      9600 bps
      7200 bps
      4800 bps
      2400 bps

  8. Press the right arrow to display the applicable RX Speed.

  9. Press <Set>.

  10. Press <Stop/Reset> to return to standby mode.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments