Set B95 to TAM Mode

Article ID: ART159911 | Date published: 06/09/2015 | Date last updated: 12/28/2015


For the fax machine to effectively switch between voice and fax messages using the built-in answering machine, it must be set to [TAM] Mode.


[TAM] Mode (Built-in Answering Machine)

The fax is in [TAM] mode if TAM LED on the operation panel remains ON.

A: TAM button
B: Delete button
C: Record button
D: Play button

Before using the built-in answering machine (TAM), record an outgoing message (OGM). Use the microphone on the operation panel to record the OGM. Only one out OGM no longer than 20 seconds can be recorded.

Recording the OGM:

  1. Press <Function>.

  2. Press < (left) or > (right) arrow to select [MSG REGISTRATION]. The arrow buttons are located above TAM Mode button.

  3. Press <Start/Copy>.

  4. Use < or > to select [OUTGOING MESSAGE].

    An alternative OGM, fax/telephone switching message or forwarding message by selecting the appropriate message above and then continuing on to steps 5 and 6.

  5. Press <Record> and speak into the microphone to record your outgoing message.
    1. Or, press <Start/Copy>.
    2. Use < or > to select [RECORD] and press <Start/Copy> again.
    3. Then speak into the microphone to record your outgoing message.

  6. Press <Stop> twice when recording is finished.

An OGM cannot be deleted. To record a new OGM, repeat steps 1 to 6. The old OGM will be automatically deleted when a new message is recorded.

See below for B95 Operation Panel

FAXPHONE B95 Operator Panel

Click on either One-touch or TAM buttons for detailed information.

One-touch Buttons


TAM Buttons




Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments