Copy Intensity

You can adjust the copy intensity manually or allow the printer to automatically adjust the copy intensity.

Manual Copy Intensity

1. Confirm that the printer is powered on and press the <Open> button. (The paper output tray will open.)
   
   
   
   
2. Load paper in the auto sheet feeder in the portrait orientation.
   
   
3. Lift the document cover and set a document on the platen glass.
   
   Note:
   - Regardless of the document size, place it face down in landscape orientation on the platen glass.
   
   - Align the document with the alignment mark (shown as the arrow) on the lower right corner of the platen glass.
   
   - The machine cannot scan the area approximately 3 mm from the front and right edges of the platen glass.
   
   
   
   < 1 > Alignment Mark
   
   
4. Close the document cover gently.
   
   
5. Confirm that the printer is in Copy mode. If the printer is not in Copy mode, press the <COPY> button to switch into Copy mode.
   
   
6. Change the copy intensity by pressing the right or left arrow.
   
   Note:
   * Pressing the left cursor button decreases the intensity.
   * Pressing the right cursor button increases the intensity.
   
   
   The above illustration will vary by model.
   
   
7. Press the <Color> button for color copying, or the <Black> button for black & white copying. (The machine starts copying.)
   
   
8. To cancel copying, press the <Stop/Reset> button.

Automatic Copy Intensity

1. Press the <Settings> button. The [Settings] screen is displayed.
   
   
2. Use the right or left cursor button to select [Settings 2] tab <4>.
   
   
3. Use the up or down cursor button to select [Auto Intensity] <5>.
   
   
   
   
4. Use the right or left arrow to select Auto intensity ON or Auto intensity OFF.
   
   Note: If you set Auto intensity ON, printing is possible with automatically adjusted intensity, according to the document set on the platen glass.
   
   
5. To complete Auto Intensity setting, press the <Settings> button.