With just one shot, three images having a different color tone can be recorded simultaneously. Based on the white balance mode's standard color temperature, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing. It can be set up to +/- 3 levels in single-level increments.

-	1. Set the image-recording quality to any setting except RAW and RAW+JPEG.
	2. Select [WB SHIFT/BKT]. Turn the <> dial to select [WB SHIFT/BKT], then press <>. The WB correction/WB bracketing screen will appear.
	3. Set the bracketing amount. Turn the <> dial to set the bracketing direction and bracketing level. When you turn the <> dial, "" on the screen will change to " " (3 points). Turning the <> dial to the right sets the B/A bracketing, and turning it to the left sets the M/G bracketing. Set the bracketing level for the B/A or M/G bias up to +/- 3 levels in single level increments. (The bracketing level cannot be set for the B/A and M/G bias.) On the right side of the screen, "BKT" indicates the bracketing direction and the bracketing level is also displayed. Press <> to exit the setting and return to the menu.
-	4. Take the picture. When B/A bracketing has been set, the three images will be recorded onto the CF card in the following sequence: Standard WB, B (blue) bias, and A (amber) bias. If M/G bracketing has been set, the sequence will be Standard WB, M (magenta) bias, and G (green) bias. The current drive mode will be used for the shooting.