How to set the drive mode on the EOS 20D and EOS 5D and EOS 30D.
Article ID: ART160242 | Date published: 06/09/2015 | Date last updated: 11/04/2015
 

Description

How to set the drive mode on the EOS 20D and EOS 5D and EOS 30D.

Solution

1. Press the <DRIVE ISO> button. ()
2. Select the drive mode.
  • While looking at the LCD panel, turn the <> dial.

: Single Shooting

When you press the shutter button completely, one shot will be taken.

: Continuous shooting (Max. 5 shots per sec.)

While you press the shutter button completely, shots will be taking continuously.

: Self-timer Operation

  • During continuous shooting, the captured images are first stored in the camera' s memory and then successively transferred to the CF card. When the memory becomes full during continuous shooting, "" will be displayed on the LCD panel and in the viewfinder and the camera cannot take any more shots. As the captured images are transferred to the CF card, you will be able to capture more images. Press the shutter button halfway to check in the viewfinder' s bottom right the current remaining shots of the maximum burst.
  • If "" is displayed in the viewfinder and on the LCD panel, wait until the access lamp stops blinking, then replace the CF card.
  • When the battery level is low, the maximum burst will be slightly lower.

SIMS Doc Id

0