Setting up slideshows PowerShot G6
Article ID: ART160435 | | | Date published: 06/09/2015 | | | Date last updated: 08/18/2015 |
Description
Setting up slideshows PowerShot G6
Solution
Automated Playback (Slide Show)
All images or a selection of images on a CF card can be displayed one-by-one in an automated slide show.
Slide show image settings are based on DPOF standards.
All images |
Plays all the images on the CF card. |
Slide Show 1-3 | Plays the images selected for each show in order. |
Selecting Images for Slide Shows
Adjusting the Play Time and Repeat Settings
Starting a Slide Show
- In the [
(Play)] menu, select [Slide Show] and press the <SET> button.
- Select [Program] using the
or
arrows and select between [All images] or one of [Show 1]-[Show 3] using the
or
arrows.
- Select [Start] using the
or
arrows and press the <SET> button. The show will start and automatically stop when the show is done.
Pausing and Resuming a Slide Show
Press the <SET> button to pause the show. Press it again to resume.
Fast Forward/Rewinding a Slide Show
Turn the main dial or use theor
arrows to move to the previous or next image.
Stopping a Slide Show
Press the <MENU> button during a slide show to stop it and display the slide show menu. - When the slide show is over, press the <MENU> button. The slide show appears again. Press the <MENU> button again to close the menu.
![]()
|
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 998 images may be marked per slide show. Images display in the order of their selection.
- In the [
(Play)] menu select [Slide Show]
- Select [Program] using the
or
arrows and select [Show 1], [Show 2] or [Show 3] using the
or
arrows.
A checkmark () will appear beside a show already containing images.
- Choose [Select] using the
and
or
arrows and press the <SET> button.
-
Mark images to include in the show.
Single Image Playback
- Move between images using the main dial or the
or
arrows and mark or remove marks from images using the
or
arrows.
- The selection number and a check mark
appear at the bottom of selected images.
- Press the
button to switch to index playback (3 images).
- Select an image using the main dial or the
or
arrows and mark or remove marks from images using the
or
arrows.
- The selection number and a check mark
appear at the bottom of selected images.
- After you press the <SET> button, you can select all the images by selecting [Mark All] using the
or
arrows and pressing the <SET> button again. You can deselect all the images by selecting [Clear all].
- You can select images using the
or
arrows and change the setting using the
or
arrows after [Mark All] or [Clear all] has been selected.
- Move between images using the main dial or the
- Press the <MENU> button. The image selection screen will close.
Adjusting the Play Time and Repeat Settings
Play Time |
Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 seconds, 15 seconds, 30 seconds and Manual. |
Repeat |
Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped. |
- In the [
(Play)] menu, select [Slide Show] and press the <SET> button.
- Select [Set up] using the
or
arrow and press the <SET> button.
- Select [Play Time] or [Repeat] using the
or
arrow.
- Select a setting using the
or
arrow.
- Press the <MENU> button. The setup menu closes.
![]()
|
SIMS Doc Id
0