The following messages may appear on the LCD monitor.
| Busy... |
Image is being recorded to, or read from, CF card. Resetting settings to default. |
| No Memory card |
You attempted to shoot or replay images without a CF card installed. |
| Cannot record! |
You attempted to shoot an image without a CF card installed. |
| Memory card error! |
CF card has experienced an anomaly. |
| Memory card full |
CF card is too full to save more images or print settings. |
| Naming error! |
The file could not be created because there is a file with the same name as the directory that the camera is attempting to create, or the highest possible file number has already been reached. In the Rec. menu, please set [File No.] Reset to [On]. After you save all the images you wish to retain onto a computer, format the CF card. Please note that formatting will erase all the existing images and other data. |
| Change the battery pack |
Battery charge is insufficient to operate the camera. Replace with new AA-size alkaline batteries or fully charged Canon AA-size NiMH batteries (Be sure to replace all batteries at the same time.). |
| No image |
No images recorded on CF card. |
| Image too large |
You attempted to replay an image larger than 4064 x 3048 pixels. |
| Incompatible JPEG format |
You attempted to replay an incompatible JPEG file. |
| Corrupted data |
You attempted to replay an image with corrupted data. |
| RAW |
You attempted to replay an image recorded in an incompatible RAW format. |
| Cannot magnify! |
You attempted to magnify an image that was photographed with another camera, recorded in a different format, or edited on a computer. |
| Cannot rotate |
You attempted to rotate an image that was photographed with another camera, recorded in a different format, or edited on a computer. |
| Unidentified Image |
You attempted to play back an image that was recorded in a special format (proprietary format used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera. |
| Incompatible Wave format |
Cannot attach sound memo to the image because the image has some sound file recorded in an inappropriate format. |
| Cannot register this image! |
You attempted to register an image recorded with another camera as a start-up image. |
| Protected! |
You attempted to erase a protected image. |
| Too many marks |
Too many images have been marked for printing or for inclusion in a slide show. Cannot process any more. |
| Unselectable image |
You attempted to set the print settings for an non-JPEG file. |
| Cannot complete! |
Couldn't save the print, transfer or slide show settings. |
| Cannot edit |
Slide show settings file is corrupted. |
| Cannot change! |
You attempted to change to the RAW format an image that was shot with the digital zoom or that was already recorded in the RAW format. |
| Exx |
(xx: number) Camera malfunction. Turn the power off and then back on, then shoot and replay. A problem exists if the error code reappears. Note the number and contact our Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in replay mode. |
 |
Playing back image. |
 |
Connected to computer in PC connection mode. |
 |
Adequate battery charge. |
 |
Low battery charge. Charge the battery as soon as possible to use for any length of time. |
 |
No CF card in camera, CF card/battery cover is open, or CF card error. |
 |
Power turned on while holding the lens. Turn power off and on again. |
 |
Intervalometer is set (shoots images automatically at set time intervals). (The number of remaining shots display after the first images is shot.) |
