Using the Flash

Red-Eye Reduction

Slow Sync Flash

Use the flash according to the guidelines below.

1. Press the button to switch between flash modes.

• The selected flash mode appears on the LCD monitor.
• You can switch between settings by pressing the button.
• It may take longer for the camera to autofocus right after the flash pops up.

When the red-eye reduction function is on:

When the red-eye reduction function is off:

2. Shoot the image.

• Shooting procedures are the same as for the mode.
  
  

	Red-eye reduction, Auto	The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires.
	Auto	The flash fires automatically as required by the lighting level.
	Red-eye reduction, Flash on	The red-eye reduction lamp and the flash always fire.
	Flash on	The flash always fires.
	Flash off	The flash does not fire.

Setting the Red-eye Reduction Function

The red-eye reduction lamp fires when the flash is used in dark areas. This prevents light from reflecting back from the eyes and making them appear red.

1. In the [ ] menu, set (Red-eye) to [On].

Setting the Slow Synchro Flash mode

You can shoot images using the flash with a slow shutter speed. This helps brighten up dark backgrounds when shooting night scenes or with indoors lighting conditions.

• This function is only available in the P, Av, and modes.
• When shooting with [Slow Synchro] set to [On], camera shake may become a factor. We recommend the use of a tripod.
  

1. Power the camera in (Shooting) mode and press the <MENU> button.

2. Select [Slow Synchro] using the or arrow on the omni selector.

3. Select [On] using the or arrow on the omni selector and press the <MENU> button.

Red-Eye Reduction

When shooting with the red-eye reduction function, the subjects must look right at the red-eye reduction lamp for this mode to be effective. Try asking them to look directly at the lamp. Even better results can be obtained by shooting with the lens set to a wide angle, increasing the lighting in indoor settings or approaching closer to the subject.

When shooting with a high ISO sensitivity and using the flash, there is more of a chance of overexposure the closer you are to the subject.

• Some settings are not available with certain Shooting modes.
• The flash fires with automatic adjustments when [Flash Adjust] is set to [Auto] in the Rec. menu. When shooting M in mode, or with [Flash Adjust] set to [Manual], the flash fires with the manually set adjustments.
• When [Flash Adjust] is set to [Auto], the flash fires twice. A pre-flash will fire and will be followed by the main flash. The pre-flash is used by the camera to obtain the subject's exposure data so that the main flash can be set to the optimal intensity for the shot.
• The fastest shutter speed for flash synchronization is 1/250 second. The camera automatically resets the shutter speed to 1/250 second if a faster speed is selected.
• Shots cannot be taken while the flash is charging.
• The flash may take up to approximately 10 seconds to charge in some cases. Actual times will vary according to usage and the battery charge.
• The flash setting is saved when the camera is turned off in the P, Tv, Av and M Shooting modes.