Transferring Memory Card Images to a Computer ZR65mc and ZR70mc

Article ID: ART160910 | Date published: 06/09/2015 | Date last updated: 08/18/2015


Transferring Memory Card Images to a Computer ZR65mc and ZR70mc


Transferring Memory Card Images to a Computer ZR65mc & ZR70mc

You can download images from the memory card to a computer using the supplied USB cable.

For information on how to use ZoomBrowser EX to transfer images, please perform a new seach for "how to download images using ZoomBrowser 4.x."

PC CONNECT appears to indicate that the camcorder is connected to the computer via USB cable.

  • Do not disconnect the USB cable, open the memory card cover, remove the memory card, change the position of the TAPE/CARD switch or turn off the camcorder and computer while data is being transferred to the computer (while the camcorder's card access indicator is flashing). Doing so may damage the memory card's data.
  • Operation may not work correctly depending on the software and the specifications/settings of your computer.
  • The image files on your memory card and the image files saved on the hard disk drive of your computer are valuable, original data files. If you wish to use image files on your computer, make copies of them first, and use the copied file, retaining the original.
  • Make sure that camcorder and computer are not connected with a DV cable before connecting the camcorder to the computer using the USB cable. Otherwise, the computer may not operate properly.

  • We recommend powering the camcorder from a household power source while it is connected to the computer.
  • Refer also to the computer instruction manual.
  • Still images/movies recorded on a tape cannot be transferred to a computer via USB interface. Use the DV cable instead.

  • On the ZR70mc, the light-up buttons turn off during USB connection.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments