Borderless Printing MP730 / MP700
Article ID: ART160961 | Date published: 06/09/2015 | Date last updated: 08/18/2015
 

Description

Borderless Printing MP730

Solution

Borderless printing

To print over the entire surface of the paper without leaving any margins, select 'Borderless Printing'. The document is enlarged to fill the entire paper before being printed.

Paper you can use:

Photo Paper Pro, Photo Paper Plus Glossy, Matte Photo Paper, Glossy Photo Paper, Glossy Photo Cards

Document settings in the application:

  • Applications where margins can be specified
    • Set the top, bottom, left and right margins to 0 inch.
  • Applications where margins cannot be specified
    • Set the size of the document to be printed to the same size as the paper, and position your photograph or illustration to fit the entire paper (so as not to leave any margins).
  1. Load paper in the printer.

  2. Open the 'Printer Properties' dialog box.

  3. On the 'Main' tab, in 'Media Type', select the paper type.

  4. On the 'Page Setup' tab, select 'Borderless Printing'. If a print media not compatible with borderless printing is selected, a dialog box asking you to confirm the print media type will be displayed. Select a different print media, then click 'OK'. Adjust the 'Amount of Extension'.

  5. When a message asking you to confirm borderless printing appears, click 'OK'.

  6. Adjust the 'Amount of Extension'. When you select borderless printing, the image isenlarged to a size slightly larger than the paper size, and the area that extends over the paper is not printed. Move the slider to adjust the extension amount. It is recommended that the slider be set on the second stop from the right. Moving the slider to the left will reduce the extension amount and a white border may appear.

  7. If necessary, adjust any other settings in the 'Printer Properties' dialog box.

  8. In the 'Printer Properties' dialog box, click 'OK'.

SIMS Doc Id

0