Procedure for setting ISO PowerShot G6

Article ID: ART161041 | Date published: 06/09/2015 | Date last updated: 08/18/2015


Procedure for setting ISO PowerShot G6


Changing the ISO Speed

Change the ISO speed when shooting in dark places or when you want to shoot with a faster shutter speed. You can choose from the following speeds: Auto, 50, 100, 200 and 400. This function is only available in P, Tv, Av, and M modes.

This feature is only available in the creative zone modes: P, Tv, Av and M.

1. With the LCD on, press the <FUNC.> button.

2. Select * (ISO Speed) or using the up or down arrow on the omni selector.

* The current setting is displayed.

3. Select the desired setting using the left or right arrow on the omni selector.

  • You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.

4. Press the <FUNC.> button or click the main dial.

5. Shoot the image.

  • Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible.
  • Although the AUTO setting selects the optimal speed, it will automatically raise the speed when the shooting condition limits are reached. It will also raise the speed when the light from the flash is insufficient to illuminate the subject matter.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments