How to load or unload a cassette into/from my camcorder Elura 40MC and Elura 50

Article ID: ART161125 | Date published: 06/09/2015 | Date last updated: 08/18/2015


How to load or unload a cassette into/from my camcorder Elura 40MC and Elura 50


Loading/Unloading a Cassette Elura 40MC and Elura 50

Use only videocassettes marked with the logo.

  1. Make sure that you have attached a power source.

  2. Slide the OPEN / EJECT  switch to release the cassette compartment cover.
    Pull the cover fully open (while holding the button) and wait a couple of seconds for the cassette compartment to open automatically.
    - The confirmation beep sounds when the cassette cover fully opens.

  3. Load/unload the cassette.
    - Insert the cassette gently with the window facing outward and the REC/SAVE tab to the bottom.
    - Unload the cassette by pulling it straight out.

  4. Press the mark on the compartment until it clicks, and wait for it to close.

  5. Click the cover back into place.
  • Do not interfere with the cassette compartment while it is opening or closing automatically, and do not attempt to close the cover until the cassette compartment has fully retracted.
  • After loading a cassette, use record search to find the point where you want to start recording.
  • Be careful not to get your fingers caught in the cassette compartment cover.
  • Do not leave the cassette in the camcorder after use, return it to its case and store it in a cool, clean, dry place.
  • When you turn the camcorder' s power on, flashes in the display until you load a cassette.
  • With some types of tapes, the remaining tape display may not give an accurate reading.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments