Printing a Specified Area Trimming

You can print a specified area of the photo displayed on the LCD.

Note: Please trim the photo after specifying Page size,Media type, and Borderless/Bordered
on each settings screen. If you change the settings after trimming the photo, the trimmed selection will be lost.

1. Select the photo to trim.

Use the or buttons to select the photo.

2. Set the Trimming Mode.

Press the <Trimming> button on the operation panel. The printer is now in Trimming Mode.

3. Trim the sections you want to print.

• Trimming button: you can rotate the trimming area.
  
• buttons: you can move the trimming area.
  
• buttons: you can enlarge or reduce the trimming area.

4. Finalize the trimmed area.

a. Press the <OK> button. The trimming area is fixed and the original photo is displayed.

Note:

• Trimming limits are displayed on photographs that have been trimmed.
  
• Once the trimmed area is finalized, if you press the <Trimming> button again, you can modify the trimmed area.
  
• If you want to cancel the trimming mode, press the <Trimming> button and then press the <Stop/Reset> button in the Trimming screen. Removing the memory card also cancels the trimming mode.
  
• You cannot save the trimmed image to a memory card.