Clearing an Ink Error

Article ID: ART161275 | Date published: 06/09/2015 | Date last updated: 08/18/2015


The function for detecting the remaining ink level will be disabled.


Clearing the Ink Error

If you want to continue printing in this condition, press and hold the <Stop> button on the printer for at least five seconds, and then release it.

  • Replace the ink cartridge and close the Scanning Unit (Printer Cover).

  • If printing is in progress, and you want to continue printing, press the <Stop>
    button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.

  • Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.

  • Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

Note: Dependent on the model, the remaining ink volume screen on the display will show up gray if the remaining ink level detector is disabled.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments