Scanning Multiple Documents Using ScanGear MP (Windows)
Multiple documents can be scanned at one time with ease.
The following is an example using ArcSoft PhotoStudio 5.5.
Note:
The following document types will not be cropped accurately.
- Documents smaller than 1 inch (25 mm) square.
- Documents with a long edge at least 4 times longer than the short edge.
The following document types may not be cropped accurately.
In that case, scanning documents individually is recommended.
- Photographs that have an overall whitish appearance.
- Photographs that have a whitish border.
- Documents other than photographs (particularly documents printed on white paper, hand-written text, business cards etc.).
- Place the documents face down on the platen glass.
Up to 10 documents can be scanned at one time.
(Memo)
Keep more than 3/8 inch (1cm) between the documents, and the documents and the edge of the platen glass.
If documents are placed on a slant less than 10 degrees, the documents will be scanned after automatic correction is performed.
- In the File menu of the application software, select 'Acquire'.
- If ScanGear MP is not launched, click 'Select Source' from the File menu.
- Click the printer name you are using to register then click 'OK'.
- Click 'Acquire'.
- Click the 'Multi Scan' tab.
- If required, select other scanning setting changes.
- Click 'Scan' to start scanning.
Multiple documents will be scanned at one time.
- When scanning is completed, the scanned images will be displayed in the window of the application software.
Perform other functions such as editing in the application software.
