If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
Note
-
If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
Replace the ink tank whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
-
Make sure that the power is turned on.
-
Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the LCD. Select A4 or Letter for Page size and Plain paper for Type, then press the OK button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
-
Open the paper output tray gently.
-
Select 
Setup on the HOME screen.
The setup menu screen will appear.
-
Select 
Maintenance, then press the OK button.
The Maintenance screen will appear.
-
Select Auto head alignment, then press the OK button.
The confirmation screen will appear.
-
Confirm the message, select Yes, then press the OK button.
The print head alignment sheet will be printed.
Important
- Do not touch any printed part on the print head alignment sheet. If the sheet is stained or wrinkled, it may not be scanned properly.
-
When the message "Did the patterns print correctly?" appears, confirm that the pattern is printed correctly, select Yes, then press the OK button.
-
Confirm the message, then load the print head alignment sheet on the platen glass.
Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark 
on the bottom right corner of the sheet with the alignment mark 
.
-
Close the document cover gently, then press the OK button.
The machine starts scanning the print head alignment sheet, and the print head position will be adjusted automatically.
Important
- Do not open the document cover or move the print head alignment sheet on the platen glass until adjusting the print head position is complete.
-
When the completion message appears, press the OK button.
Remove the print head alignment sheet on the platen glass.
Note
- To print and check the current head position adjustment values, select Print the head alignment value on the Maintenance screen.
