Saving After Checking Scan Results in IJ Scan Utility (Mac) - MX490 / MX492

Article ID: ART161904 | Date published: 09/17/2015 | Date last updated: 04/15/2019


This article provides information on checking scan results before saving with the IJ Scan Utility on a Mac.



You can check the scan results, then save the images to a computer.


  • You cannot check the scan results before saving when scanned using Auto scan or the operation panel.


  • The screens for scanning photos are used as examples in the following descriptions.
  1. Start IJ Scan Utility.

  2. Click Settings...

    figure: IJ Scan Utility

    The Settings dialog appears.

  3. Click Photo Scan.

    figure: Settings dialog
  4. Select the Check scan results checkbox, then click OK.

    figure: Settings dialog

    The IJ Scan Utility main screen appears.


  5. Click Photo.

    figure: IJ Scan Utility

    Scanning starts.

    When scanning is completed, the Save Settings dialog appears.


    • Click Cancel to cancel the scan.
  6. Change the image order or file save options as required.

    You can change the image order or file save options in the Save Settings dialog.


    • The default save folder is the Pictures folder.
  7. Click OK.

    Scanned images are saved according to the settings.

MX490 / MX492 Page


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments