Removing / Reseating the Print Head - iP110

Article ID: ART161980 | Date published: 09/17/2015 | Date last updated: 05/10/2019


This article shows how to remove or reseat the PIXMA iP110 print head.



To remove the print head from the PIXMA iP110:

  1. With the printer powered on, open the print head cover so that the print head holder moves to the replacement position.

  2. Remove the ink tanks by pressing the tab (A) on the front of each ink tank and then lifting them.  Do not touch the print head lock lever tabs (B).

  3. After removing the ink tanks, gently press the tabs on the print head lock lever inward.

  4. After pressing the tabs inward, gently lift the lock lever.

  5. Gently lift the print head from the print head holder to remove it.

  6. To reseat the print head, place the print head back into the print head holder.

  7. Make sure that the arrow marks on the print head and the print head holder are aligned.

  8. Close the print head lock lever.  Push tabs until they click to lock the lever into place.


  9. Reinsert the ink tanks.  Insert the front end of the ink tank at a slant.  Then press the push mark on the ink tank until the ink tank snaps into place.

    Make sure that the ink lamp lights up.
  10. Close the print head cover.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments