Article ID: ART162180 |
| |
Date published: 09/17/2015 |
| |
Date last updated: 09/17/2015 |
Description
Setting the flash to fire for each shot (On) (PowerShot ELPH 350 HS / IXUS 275 HS)
Solution
Setting the flash to fire for each shot (On) (PowerShot ELPH 350 HS / IXUS 275 HS) ID
:
8202522200
_
EN
_
1
|
Solution |
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
IMPORTANT
- The following section explains the setting procedures when the cameras shooting mode has been set to [Program AE] ().
- The flash cannot be set to [On] in some shooting modes. The shooting modes in which the flash cannot be set to [On] are shown below:
[Hybrid Auto] ( ) , [Creative Shot] ( ), [Auto] ( ), [High-speed Burst] ( ), [Low Light] ( ), [Fireworks] ( )
1. Press the power button to turn the camera on.
2. Press the [Flash] ( ) button.
3. Press the [ ], [ ] buttons to choose [On] ( ).
4. The option you configured is now displayed.
|