Ask a Question

Support Code 2500: Print Alignment Issue – PIXMA MG7520, MG7720

Article ID: ART162457 | Date published: 09/17/2015 | Date last updated: 01/23/2020
 

Description

Resolve the Support Code 2500 error indicating the Automatic Print Head Alignment has failed on your MG7520 or MG7720 printer.

Solution

There are three potential solutions to fix the Automatic Print Head Alignment.

Take appropriate action

To get started, tap OK on the touch screen to dismiss the error, then try the 3 solutions below:

  1. Adjust your operating environment and/or the position of the printer so that the paper output slot is not exposed directly to strong light.

  2. Print the nozzle check pattern on the MG7520 or MG7720 to check the status of the print head.

  3. Load one sheet of A4 Letter-sized plain paper and perform Automatic Print Head Alignment again.

If the problem continues after aligning the print head again, tap OK on the touch screen to dismiss the error, and then perform Manual Print Head Alignment.

Note Get a full list of support codes for the MG7520 or MG7720.

If your product issue isn't resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your additional options.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments