Fine-Tuning the Paper Feed Amount (Fine Feed Adjustment) (iPF830/iPF840/iPF850)
| Article ID: ART162641 |
| |
Date published: 10/01/2015 |
| |
Date last updated: 09/12/2017 |
Description
Fine-Tuning the Paper Feed Amount (Fine Feed Adjustment) (iPF830/iPF840/iPF850)
Solution
| Solution |
If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing [Adj. Fine Feed] during printing to fine-tune the feed amount.
NOTE
- The [Adj. Fine Feed] menu is only displayed during printing.
Additionally, it is displayed when you have selected [Automatic] or [Print Quality] in [Adj. Priority] in [Feed Priority].
- Always execute [Adj. Quality] before [Adj. Fine Feed].
Once you execute [Adj. Quality], the [Adj. Fine Feed] value will revert to 0.
Perform adjustment as follows.
1. On the Tab Selection screen of the Control Panel, press  or  to select the Settings/Adj. tab (  ).
NOTE
- If the [Tab Selection screen] is not displayed, press the [Menu] button.
2. Press the [OK] button. The [Set./Adj. Menu] is displayed.
3. Press  or  to select [Adj. Fine Feed], and then press the [OK] button.
4. Press  or  to select a setting value in the range -5 to 5, and then press the [OK] button. At this time, if banding in dark colors appears, select a setting value in the range 1 to 5, and if banding in light colors appears, select a setting value in the range -1 to -5.
|
|
ID: 8202693700_EN_1
|
