Adding a Date Stamp when Shooting
Article ID: ART162822 | Date published: 10/01/2015 | Date last updated: 11/16/2015
 

Description

Adding a Date Stamp when Shooting

Solution

The camera can add the shooting date to images, in the lower-right corner.

IMPORTANT
  • The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.
  • Note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct.
NOTE
  • For setting or changing the date and time, please click here.
  • In some shooting modes it may not be possible to configure the [Date Stamp] setting.
For a list of shooting modes in which the [Date Stamp] setting can be configured, please refer to the table below.

The procedure for adding a date stamp to images during shooting is explained below.

1. Press the <Power> button to turn the camera on.

2. Press the <MENU> button.

3. Press the [ ], [ ] buttons to select the [ ] tab.
Press the [ ], [ ] buttons to select [Date Stamp].

4. Press the [ ], [ ] buttons to choose [Date] or [Date & Time].
Press the <MENU> button when finished.

5. When [Date Stamp] is set to [Date] or [Date & Time], [ ] is displayed on the LCD monitor.

6. The [Date Stamp] will be added to the images as shown below:
[Date]
[Date & Time]

NOTE
It is not possible to edit the displayed date, color, style, or position of date stamps.

  • Shooting modes in which the [Date Stamp] setting can be configured are shown below.
ModelShooting Mode
PowerShot SX530 HS , , , , , , , , , , , ,
PowerShot SX410 IS / PowerShot ELPH 160 / IXUS 160 / IXUS165 / PowerShot ELPH 170 IS / IXUS 170 , , , , , , ,
PowerShot SX610 HS / PowerShot ELPH 350 HS / IXUS 275 HS , , , , , , , , ,

SIMS Doc Id

8202331700